What is the option that will most accurately define the Fabre Channel domain IDs implementation?

What is the Cisco MDS feature that should be enabled for the Cisco TrustSec FC Link Encryption to work?

What is the technology that would be needed to facilitate the remote VTEP discovery in the underlay?

The vPC configuration that you posses has two functional peers whose link is up and the link feature is restricted the spanning-tree operations in the configuration? Pick two of the best options.

The Cisco MDS switch that you have often uses the port channel and you have to make sure that the frames present between destination and source are able to follow the same links for the right flow. If a different link can be used by subsequent flows, what is the load balancing method that you will use?

The command peer switch is configured within the7K’s vPC configuration. What would be the result of enabling the command?

What are the two items which the Cisco Fabric Services provide services for? Pick two of the best options.

There are two Fibre Channel switches which are connected through the EISL. Since you own it, you find that they are isolated. Pick two options which could be considered to be the cause of fabric isolation?

What is the statement about the SNMP support on the Cisco Nexus Switches is considered true?

What is the command that you have to run in order to limit the IS-IS LSP flooding on a network?

What are the two configurations which will considered correct when configuring the HSPR on the IPv6 enabled interface?

A Cisco Nexus 2300 Series FEX is being connected to a Cisco Nexus 5600 Series parent switch by you. What is the command that you have to use in order to configure the interfaces on Nexus switch that connecting to the FEX?

A Cisco FabricPath network is in your possession and, for a downstream switch, you have to implement the Vpc+. What three actions will you choose to perform? Pick three of the best answers.

What are the two protocols which are used to backup the Cisco Nexus 5600 Series switch configuration to a location which is remote. Pick two of the best ones.

On a Cisco Nexus 7000, after you enable a strong, reversible 128-bit Advanced Encryption Standard password type-6encryption, what is the command which would be able to convert the passwors which are weakly encrypted or convert the plain existing, to type-6 encrypted passwords?

Amongst the options given below, choose the action which will limit the maximum routes allowed on the routing table.

What default Fibre Channel interface type is used for an FCIP virtual interface?

What is the statement which will describe the FSPF implementation on Cisco MDS 9700 Seriesswitches most accurately?

A Cisco Fabric Path network, which you possess, need to be extended in order to support more than 18 billion segments. What will you do?

What is the statement about the VRRP and HSRP which are considered to be true on the Cisco Nexus 7000 series router?

Once the confirmation of the 7K’s command peer-gatewaway configuration, within the vPC configuration, is done with the command showing vPC, what would be the result of enabling this command?

Amongst the options mentioned below, which two can possibly be used for the aggregation of the link when the vPC member interfaces is configured by you? Pick two of the best answers.

What is the PIM configuration that the Cisco NX-OS supports?

The vPC configuration that you own have a configuration with two functional peers whose link is up and there’s restriction on its feature in the configuration’s spanning-tree configuration? Pick two of the best answers.