Which one of the following is the best example of a common business need which is a driving force behind designing of installation for data base centers?
Which one of the following documents is not generally a result which is delivered during the design phase?
Which one of the following is considered as the most common design requisite during the creation of a data center solution?
What is a typical output of the design planning phase that characterizes an existing data center?
Which two attributes from the following are connected with a Data Center Uniﬁed Fabric network’s core layer?
- B. QoS—policing
Which three of the following attributes can be connected to a Data Center Uniﬁed Fabric network’s aggregation layer?
- B. QoS—policing
For the access layer of a Data Center Uniﬁed Fabric network, which three of the following attributes, can be considered as vital?
- B. QoS—policing
Which one of the following protocols is recommended by Cisco for the purpose of creating a connection between a remote data center to the main data center?
Which one of the following transitions is most likely to occur in case of migration from an existing data center to a Uniﬁed Fabric network?
In the design of a data center which three of the following protocols you should use to reduce the use of STP?
Which three of the following routing protocols should you make use of in case of a medium sized data center?
Which modified protocol from the following is used as a base for forwarding of the Layer 2 of multicast traffic with VPC?
Through the use of classical Ethernet, which one of the following protocol is needed for Fabric Path in order to support hosts or switches?
In order to simultaneously serve same content to all sites, which one of the following high-availability feature of a data center is needed in a geographically diverse data center environment?
Which one of the following Cisco Nexus Products is recommended by Cisco based on its requirements?
A set of rich features which makes it absolutely suitable to access-layer applications which are top of –rack, middle of – row, or end of –row.
Data center racks having features which are based on standards I and 10 Gigabit Ethernet and FCoE. For consolidation of networks, features of virtual machine awareness that empower IT departments.
Features suitable to switch family being a combination of very low latency, lossless Ethernet, high port density and wire-speed performance used in order to meet the developing demand for 10 Gigabit Ethernet.
Which three of the following are utilized by VPC for control plane operations?
Which one of the following layers has the function of performing load balancing among data centers in data center architecture?
Which one of the following innovations introduced in the Cisco NX-OS Software brings forth an absolutely novel Layer 2 data plane by way of encapsulating the frames that enter the device with a header which contains an address for the destination and routable source?
While working on the design of an environment for a data center with IP routing and ECMP among the various segments of the data center, which one of the following designs seems more suitable to you?
In the core layer of the data center, which one of the following designs will have an effect on the flow of traffic?
- B. For the purpose of extending VLAN across the Core, configuration of the Layer 2 domain is a must in a 3 Layer design which comprises of the access, aggregation, and core layers.
- C. Extension of Layer 2 through a core can cause STP path blocking and carries the risk of several uncontrollable issues with broadcast in relation with this extension. Therefore, it must be avoided.
At the time of designing of a collapsed core data center, which two of the following technologies are used most efficiently for virtualization of the aggregation layers and the core?
There is no isolation available in the classical aggregation layer design on either one of the data plane or the control plane. Which one of the following poses as viable solution to this issue?
Which one of the following items has a high value due to which the classical access layer is becoming limited?
One of your customers is working on the design of a new data center. They want the aggregation layer to route and inherit the capacity of Layer 3. Which one of the following Cisco platforms can meet this need?
Which one of the following technologies can ensure the provision of simplifying and scalability of an Ethernet network due to which forwarding becomes more efficient and the need for the Spanning Tree Protocol is completely eliminated?
About Individual Course:
|Learning Style||Self-Paced Learning|
|Course Duration||1 Hour|