Certification Exam Prep Questions For
(300-075) Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)

Name: Practice Exam - Implementing Cisco IP Telephony and Video, Part2
SKU: Practice Exam - Implementing Cisco IP Telephony and Video, Part2
Price: 99 USD
Availability: InStock

QuickStart is now offering assessment questions for Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) (300-075). Whether you are deciding which exam to sign up for, or simply want to practice the materials necessary to complete certification for this course, we have provided a practice assessment to better aid in certification. 100% of the questions are real questions; from a recent version of the test you will take for Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) (300-075).

A Cisco EX60 has been configured by an engineer in order to register with Cisco VCS-C. However, the device is showing as unregistered. Which of the following component is the engineer most likely to find during troubleshooting?

A. MCU: Incorrect.

B. default gateway: Incorrect.

C. gatekeeper: Correct!

D. TMS: Incorrect.

E. default: Incorrect.

F. DNS: Incorrect.

What is the total number of Service Advertisement Framework forwarders that can be assigned to a particular node within a node-speciﬁc Service Advertisement Framework forwarder deployment model?

A. 1: Incorrect.

B. 2: Correct!

C. 3: Incorrect.

D. 4: Incorrect.

URI calling is being configured by an engineer in a similar cluster. Choose any four actions that are to be accomplished through this configuration.

A. Configure the directory URI partition and calling search space.: Correct!

B. Configure SIP route patterns.: Incorrect.

C. Associate the directory URls to directory numbers.: Correct!

D. Configure the URI service parameters.: Correct!

E. Activate the URI service in Cisco Unified Serviceability.: Incorrect.

F. Assign directory URls to users.: Correct!

G. Configure SIP trunk.: Incorrect.

H. Configure the SIP proﬁle.: Incorrect.

What would happen if a user logs in by using the Cisco Extension Mobility Service on a device of which the user don’t have user device proﬁle?

A. The Extension Mobility log in fails.: Incorrect.

B. The device uses the first device proﬁle assigned to the user in Cisco Unified Communications Manager.: Incorrect.

C. The user can log in but does not have access to any features, soft key templates, or button templates.: Incorrect.

D. The device takes on the default device profile for its type.: Correct!

SIP proﬁle is being configured by an engineer for Cisco VCS SIP trunk on Cisco Uniﬁed Communications Manager. What result will be achieved when the engineer enables the option “Use Fully Qualiﬁed Domain Name" in SIP Requests?

A. Resolve FQDN using DNS type SRV record.: Incorrect.

B. Ensure FQDN is used in SIP Identity header.: Correct!

C. Ensure FQDN is used in SIP Request header.: Incorrect.

D. Resolve FQDN using DNS type A record.: Incorrect.

The three messages that a Cisco VCS use in order to monitor the status of endpoints Presence? (Choose three.)

A. in-all: Correct!

B. end-call: Incorrect.

C. start—call: Incorrect.

D. registration: Correct!

E. call-ended: Correct!

F. call-started: Incorrect.

Which of the two options are true for a Device Mobility-enabled IP phone? (Choose two.)

A. The phone configuration is not modified.: Incorrect.

B. The user-specific settings determine which location-speciﬁc settings are downloaded from the Cisco Unified Communications Manager device pool.: Incorrect.

C. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.: Correct!

D. If the DMGs are the same, the Device Mobility-related settings are also applied.: Correct!

The number of sessions during the implementation of a Media Termination Point that is supported on each DSP is determined by?

A. the size of the cluster that is being designed: Incorrect.

B. the codecs that are used in universal transcoding mode: Correct!

C. the number of full-duplex media streams: Incorrect.

D. the Cisco Unified Communications Manager node setting: Incorrect.

The three tests that can be performed by you to verify redundancy in the customer environment? (Choose three.)

A. Verify that all phones are registered to a second subscriber server.: Correct!

B. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.: Incorrect.

C. Verify that media resources fail over to a secondary subscriber server when the publisher fails.: Correct!

D. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected.: Correct!

E. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.: Incorrect.

The action that configures the phones in site A to use G.711 to site B, but uses G729 to site C?

A. Configure transcoder resources in Cisco Unified Communications Manager.: Incorrect.

B. Configure a gatekeeper.: Incorrect.

C. Configure Cisco Unified Communications Manager regions.: Correct!

D. Configure Cisco Unified Communications Manager locations.: Incorrect.

To ensure that the call load between Cisco Unified Communications Manager cluster and Cisco TelePresence Video Communication Server is shared across Unified CM nodes, which two actions can be taken?

A. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.: Incorrect.

B. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.: Correct!

C. Create one neighbor zone in VCS for each Unified CM node.: Incorrect.

D. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node: Correct!

E. Create a VCS DNS zone and conﬁgure one DNS SRV record per Uniﬁed CM node.: Incorrect.

The true statement for the function of "+" symbol in the E164 format is?

A. The "+" symbol represents the international country code.: Incorrect.

B. The "+" symbol matches the preceding element one or more times.: Incorrect.

C. The "+" symbol represents the international call prefix.: Correct!

D. The "+" symbol matches the preceding element zero or one time.: Incorrect.

The two conﬁguration components that are not changed when an IP phone moves from one device mobility group to another Assuming that the local route groups are already configured, are? (Choose two.)

A. phone button settings: Correct!

B. IP subnet: Incorrect.

C. SRST reference: Incorrect.

D. user settings: Correct!

E. region: Incorrect.

When Cisco Uniﬁed Mobility is being conﬁgured, what is the parameter that defines the control access for a call that reaches out to a remote destination?

A. Rerouting Calling Search Space under Remote Destination Profile Information.: Correct!

B. User Local under Remote Destination Proﬁle Information: Incorrect.

C. Rerouting Calling Search Space under Remote Destination information: Incorrect.

D. Calling Party Transformation Calling Search Space under Remote Destination Profile Information: Incorrect.

Which of the two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)

A. V\ﬁth static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload trafﬁc exiting the LAN1 interface.: Incorrect.

B. VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.: Incorrect.

C. VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.: Correct!

D. The Advanced Networking or Dual Network Interfaces option key has been installed.: Correct!

When you use Query wizard for conﬁguring the trace and log central feature in order to collect install logs, which time is used when you have servers that are in a cluster in a different time zone?

A. TLC queries for the time zone as part of conﬁguration.: Incorrect.

B. TLC adjusts the time change appropriately.: Correct!

C. TLC produces an error and must be run remotely.: Incorrect.

D. TLC uses its local time for all systems.: Incorrect.

Which component, from the given options, of Cisco Unified Communications Manager is responsible when the keep alive messages are sent to the Service Advertisement Framework forwarder?