What step would you take to to configure AutoDiscover as your organization's requirements?
If you need to meet the requirements for managers, what solution would you recommend?
What step do think you should take in order to design an Exchange Server organization which is supposed to meet the requirements of message routing and high availability?
What is the best solution if you are to recommend a load balancing solution meeting the requirements of delivery and availability, in case you deploy Exchange Server 2019 organization as a single data availability group including Mailbox servers in all offices?
Your company has two office locations, and each is configured as a separate Active Directory site, while the company network is configured as an Active Directory Domain Services (AD DS) domain. If your company decides on deploying two on-premises Microsoft Exchange Server 2019 Mailbox servers, you will have to propose a solution that must retain a copy of each email sent in a shadow queue for transport high availability. Do you think the solution below meets the requirements? Solution: Deploy in the same site, both Exchange Mailbox servers as stand-alone servers
Your company has two office locations, and each is configured as a separate Active Directory site, while the company network is configured as an Active Directory Domain Services (AD DS) domain. If your company decides on deploying two on-premises Microsoft Exchange Server 2019 Mailbox servers, you will have to propose a solution that must retain a copy of each email sent in a shadow queue for transport high availability. Do you think the solution below meets the requirements? Solution: Deploy in each site, one Exchange Mailbox server and then configure a database availability group containing both servers
If you want to use Serial Console so you can perform emergency security configuration on an Azure Virtual Machine you are managing, what is it that you will do first? The Azure VM runs Windows Server named v1.
You want to verify if your Active Directory and domain are correctly prepared before you start deploying an MS Exchange Server 2019 email messaging solution in your AD domain. You have not tried to deploy an Exchange Mailbox server. Which two utilities do you think you should use keeping in mind you have not tried to deploy an Exchange Mailbox server? A complete solution is reflected in each correct answer.
Your company has opened a new office. Using email messaging solution of Microsoft Exchange Server 2019 with five Mailbox servers, the company plans to deploy Exchange Server 2019 in the new office. A new computer named EX06 has Windows Server 2019 Standard edition Server Core installed. Which three components would you opt to install on EX06 if you are to configure it to support Exchange Server 2019 installation? Part of the solution is reflected by each correct answer.
EX01 is a Mailbox server in the Microsoft Exchange Server 2019 organization you have. The following command string is run: Get-TransportService EX01 I f1 "tracking" and the command result can be seen in exhibit. What is the effect of the configuration on message log tracking files?
YWith a Microsoft 365 subscription, if the users report denial of email access from their mobile devices, which PowerShell cmdlet should you use in order to to generate a list of blocked devices and the reason for the device being blocked?
You have a network with an Active Directory Domain Services domain with your domain configured as a single Active Directory site. You have datacenters in three separate locations, with one of the locations being your primary datacenter, and you are to create a database availability group (DAG) with EX01 as the initial Mailbox server with Exchange servers reflected in the exhibit. Which other Mailbox servers do you think can be added to the DAG?
With an Active Directory (AD) domain and a Microsoft Exchange Server 2019 organization, you have DAG1, a database availability group (DAG), including the Mailbox servers reflected in the exhibit. If you want to prevent users on Site1 from sending email messages larger than 10 MB to either Mailbox server in Site2, you will use the New-SendConnector cmdlet tocreate a new Send connector on EX01. Which Which two parameters should you choose to configure the Send connector?
Which cmdlet should you use if you need to configure archive mailboxes for select mail users if your company is using a Microsoft Exchange Server 2019 email messaging solution?
Your company has a Microsoft Exchange Online subscription for the email domain company.com. A partner organization your company works with comes with an email domain companyA.com. A new security policy at your company requires email messages from partner company to be using TLS encryption. Unencrypted messages will be rejected automatically. What should you create in your Exchange Online instance if you want to make sure that emails from partner domain comply with this new policy?
Choose the next step based on the following information: You have an Active Directory domain. The domain has a Microsoft Exchange Server 2019 organization with one Mailbox server. The Mailbox server is named EX01. You prepare the Edge Subscription by deploying an Edge Transport server named Edge1 on your perimeter network. You copy the Edge Subscription file to your Mailbox server. Select a step to configure the mail flow between Edge1 and EX01.
An organization has the Microsoft Exchange Server 2019 mailbox servers with mailbox databases reflected in the exhibit. None of the mailbox databases has any circular logging enabled on it. EX02 is being decommissioned and all user mailboxes are moved to databases on EX01. MDB04 is attempted to be removed but messages are received that MDB04 still contains mailboxes. Get-Mailbox cmdlet is used to verify that the database does not contain any user mailboxes. What should be done first if MDB04 is needed to be removed?
An organization using Microsoft Exchange Server 2019 email messaging solution has five Mailbox servers, all in different locations. A mobile device is issued to each company user and it uses Exchange ActiveSync. Different device operating systems and versions are currently in use as the mobile devices were separately selected by the managers in each office location. There is a glitch is a specific operating system (OS) version and it results in excessive resource consumption on that location's Mailbox server. The devices are used in that office only and are only a portion of the devices in use. It is required to prevent the mobile devices from accessing email till the time this problem is resolved and a revised OS version is applied. Which PowerShell cmdlet should be used?
You have a Microsoft Exchange Server 2013 organization. You have a network with an Active Directory (AD) domain forest and Windows Server 2008 R2 is the forest functional level. All domain controllers run Windows Server 2012 R2 and all Exchange servers run Windows Server 2012 Datacenter. If you want to upgrade your organization to Exchange Server 2019 and plan on gradually deploying new Mailbox servers to replace the existing, you will need to make sure that your organization can support the upgrade. What is the best suitable step you should take?
There are four Mailbox servers with your Active Directory (AD) domain having a Microsoft Exchange Server 2019 infrastructure. ETC01, an Edge Transport Server deployed in your perimeter network is configured with over 30 transport rules. In order to improve reliability for your mail solution you want to deploy a second Edge Transport Server named ETCO2, making sure it has the same transport rules as ETC01. What should you use if you want to minimize the effort to achieve this?
If your organization is using a Microsoft Exchange Server 2019 email messaging solution and the location used for message tracking logs needs to be changed, which two utilities will help you achieve your goal?
EX01 is a Microsoft Exchange Server 2019 and it includes a database named MDB01. MDB01 and its transaction log files are located on drive D. Consider this as the only mailbox server. Due to insufficient disk space it is becoming difficult to mount MDB01. If there is no recent backup of the database and it is required to make the mailboxes on MDB01 available to users as quickly as possible, what steps should you take?
A company with a Microsoft Exchange Online subscription has users with mobile devices connected to Microsoft Exchange Online through Microsoft Exchange ActiveSync. One of the users loses a mobile device and wants a solution. What should the user use in order to wipe corporate data from the device.
A company has an Active Directory (AD) Forest with a root domain only with a Microsoft Exchange Online subscription for an email domain. The name of the email domain is company.com. This company partners with another that carries an Exchange Online subscription for an email domain named companyA.com. It is required to prevent automatic forwards and automatic replies to email users in companyA.com. The required solution should override the options configured by the first company’s email users in Outlook. Which of the options is best suitable as a solution?
CompanyA.com is a single Active Directory Domain Services (AD DS) domain in your network. Over 2000 on-premises users and hundreds of remote users are supported by the network. You have a Microsoft Exchange Server 2019 organization configured with three Mailbox servers on your internal network and one Edge Transport Server installed on your perimeter network. What should you do if you are to block remote offline access to Outlook on the web for all users?
An organization using a Microsoft Exchange Server 2019 email messaging solution purchases six portable projectors for the sales department. Other departments can use the projectors when not in use by the sales department. If the company users are to be enabled to use their calendar in Exchange to reserve the projectors, what type of recipient should be used? Choose the BEST answer. Choosing more than one answer might help achieve the goal.
You have a domain in your network that has an Active Directory Domain Services (AD DS). The domain is named CompanyA.com. This domain is configured with two sites, LocNewYork and LocSydney, with each site having single location. You deploy a Microsoft Exchange Server 2019 organization with one Mailbox server at each location. What should you do if you need to configure your organization to use a single namespace for Autodiscover?
You want to enable by configuring continuous replication for all databases to be replicated to each server with a Microsoft Exchange Server 2019 database availability group (DAG). The Mailbox servers and databases are shown in the exhibit. The active database for that server is the server's current database. Which of these options do you think you should run first in order to setup continuous replication?
You have a network with six sites, configured as an Active Directory (AD) domain. The exhibit reflects the Site links. A hub site has not been identified yet. You have a Microsoft Exchange Server 2019 organization with one Mailbox server deployed in each site but a database availability group (DAG) has not been created. A user whose with mailbox in DB2 sends a message to a user with mailbox in DB6. What is the first hop the message will follow if you need to determine the path the message will take?
Having a Microsoft Exchange Online subscription, a user reports access denial with the email account firstname.lastname@example.org from a mobile device. A week earlier, the same user could access email from a mobile device. Which PowerShell cmdlet should you use if you are responsible to troubleshoot the problem and want to determine the device access rules that apply to the device?
|Buy Individually Timezone|
Courses Offered In This Certification
Our experts featured on QuickStart are driven by our ExpertConnect platform, a community of professionals focused on IT topics and discussions. Interact with these experts, create project opportunities, gain help and insights on questions you may have, and more.