NETAPP-ADMIN Basic NetApp Configuration and Administration (NETAPP-ADMIN)
About the course:
In this course you will learn the process of configuring basic technologies available in the etApp Data ONTAP® operating system clustered Data ONTAP and Data ONTAP operating in 7-Mode. The course consists of practical exercises and lectures which will give you a hands on experience in which you will learn the process of developing aggregates, virtual interfaces (VIFs), storage virtual machines (SVMs), FlexVol® volumes, Snapshot® copies, qtrees, and much more.
NetApp Storage Administrators can earn up to $128,000/- on average, per annum.
Once the course is complete, students will be able to;
Identify available methods for managing a cluster
List the steps used for developing and configuring a cluster
Explain SVM components, benefits and features
Explain broadcast domains, IPspaces, and subnets
Explain the methods available for accessing files in a cluster
Explain the FlexVol efficiency and volumes features
The course is intended to be undertaken by the following:
Academic Alliance students
It is always recommended to possess basic knowledge about storage networking prior to opting for this course.
Virtual Instructed-Led Outline
Module 1: Getting Started with Data ONTAP
- List basic storage concepts such as aggregates, RAID groups, volumes, qtrees, and LUNs
- Describe Data ONTAP features such as Snapshot copies, unified storage, and storage efficiency
- Describe the similarities and differences between the 7-Mode and clustered Data ONTAP operating systems
- Use the CLI and GUI for administrative purposes
Module 2: Hardware Basics
- Describe the NetApp storage system hardware platforms and the types of disks that they support
- Describe the hardware components of NetApp storage controllers
- Use OnCommand System Manager or the CLI to identify hardware components in Data ONTAP operating in 7- Mode and the clustered Data ONTAP operating system
Module 3: Creating and Managing Aggregates
- Describe aggregates and RAID groups
- Create aggregates in Data ONTAP operating in 7-Mode
- Create aggregates in the clustered Data ONTAP operating system
- Manage aggregates
Module 4: Managing NAS Client Access
- Configure NAS client access in Data ONTAP operating in 7-Mode
- Configure data storage virtual machines (SVMs*) for NAS client access in clustered Data ONTAP
- Create FlexVol volumes and qtrees
Module 5: Managing SAN Client Connections
- Describe SAN protocol implementation in Data ONTAP operating in 7-Mode and the clustered Data ONTAP operating system
- Use OnCommand System Manager to create iSCSI-attached LUNs
- Use NetApp SnapDrive for Windows to create and format iSCSI-attached LUNs
- Access and manage a LUN from a Windows host
Module 6: Managing Volumes
- Explain the relationship between space guarantees, volumes, and aggregates
- Define thin provisioning and explain how it is used
- Define deduplication and describe the benefits that it provides
- Use OnCommand System Manager to set quotas
Module 7: Managing Snapshot Copies
- Define the function of Snapshot copies
- Create and delete a Snapshot copy
- Create Snapshot policies in the clustered Data ONTAP operating system
- Restore a volume from a Snapshot copy
- Create FlexClone volume clones that are backed by Snapshot copies
Module 8: Steps to Certification
- Recall the steps to NetApp Certification Lab
- Enter Commands in the Data ONTAP CLI
- Add a 7-Mode storage system to System Manager
- Add a cluster to System Manager
- Configure the SNMP public community name for clustered Data ONTAP
- Use System Manager to investigate hardware components
- Use CLI commands to investigate hardware components
- Create an aggregate on a 7-Mode storage system
- Creating an aggregate in clustered Data ONTAP
- Configure the prerequisites for client access
- Configure CIFS setup for a 7-Mode storage system
- Enable the NFS protocol
- Configure multiprotocol access on a 7-Mode storage system
- Create a volume in Data ONTAP operating in 7-Mode
- Create qtrees on a 7-Mode storage system
- Create shares for CIFS clients on a 7-Mode storage system
- Export volumes and qtrees in Data ONTAP operating in 7-Mode
- Client-side task map a drive to a 7-Mode from a Windows client
- Client-side task mount volumes on a storage system from a Linux client
- Create a Vserver
- Configure data LIFs and CIFS setup
- Set up the Vserver management LIF
- Add host records in DNS for the SVM
- Enable the NFS protocol for a Data ONTAP cluster
- Set up name mapping for multiprotocol access
- Create volumes on the Vserver
- Create qtrees
- Mount volumes and qtrees into the Vserver namespace
- Create CIFS shares Change volume security styles
- Manage export policies
- Client-side task map a drive to a share from a Windows client
- Client-side task mount from a Linux client
- Enable iSCSI in Data ONTAP operating in 7-Mode
- Create volumes and qtrees that is suitable as containers for LUNs
- Configure SnapDrive Transport Protocol Settings
- Use the SnapDrive Management tool to establish iSCSI sessions
- Use SnapDrive to create a LUN on a Data ONTAP storage system
- Add the iSCSI protocol to be allowed on the SVM
- Create an iSCSI data LIF
- Start the iSCSI service on the Vserver
- Create volumes and qtrees that are suitable as containers for LUNs
- Configure SnapDrive for Windows Transport protocol settings
- Establish an iSCSI session with the SnapDrive iSCSI management tool
- Use SnapDrive to create a LUN on a clustered Data ONTAP SVM
- Enable storage efficiency for a FlexVol volume in 7-Mode Data ONTAP
- Run a deduplication operation in 7-Mode Data ONTAP
- Configure storage efficiency policies in clustered Data ONTAP
- Enable storage efficiency on Flexvol volumes in clustered Data ONTAP
- Run a deduplication operation in clustered Data ONTAP manually
- Assign multiple aggregates to a Vserver
- Move FlexVol volumes
- Create Snapshot copies of a volume on the Data ONTAP storage system CLI
- Create Snapshot copies of a volume on the clustered Data ONTAP CLI
- Create Snapshot copies using OnCommand System Manager
- Schedule Snapshot copies in 7-Mode and clustered Data ONTAP
- Restore a volume from a Snapshot copy in 7-Mode Data ONTAP
- Restore a volume from a Snapshot copy in clustered Data ONTAP
- Create a FlexClone volume clone on a 7-Mode storage system
- Create a FlexClone volume clone on a clustered Data ONTAP SVM
|Subjects||IT Ops & Management|
|Learning Style||Multi-Location Classroom|
|Course Duration||2 Days|
Frequently Asked Questions About Virtual Instructor-Led Courses
I can't connect to my class, what are my options?
The link to the class is available upon logging in to your dashboard. If you are unable to see it, please contact our support team at 1-855-800-8240 and they will be happy to provide you the direct link via email or the dial in number.
I can't make it to attend to class. Can I reschedule?
Yes, you can reschedule your class. Please contact your Sales representative and they will arrange this for you. If you forgot his/her name, feel free to contact our support team at firstname.lastname@example.org or 1-855-800-8240.
Will I get my certificate upon completion?
Yes. Upon completion of the course, it will be available on your course as a Trophy Icon for you to download. If you do not see this, you will need to contact email@example.com with the following details so they can email you the certificate: Class Name, Class Date, Account Rep, and Your Email.
I cannot connect to my lab. Help!
Your Lab is accessible on the bottom part of your course. You will see a button that says "LAB". Just click it to launch the lab. Please note that some classes don’t need/require a LAB. You can verify with our support team by calling them at 1-855-800-8240 or by email at firstname.lastname@example.org. You can also check with your Instructor or the Associate Instructor if your class includes one.
What is my access code for Skillpipe?
A. Not all of the classes have or require Skillpipe. If your class includes one, please check your email as you should have received one from email@example.com. In case you do not find it in your inbox, please check the Spam / Junk folder. For any further assistance, you can call the support at 1-855-800-8240 or contact them via email at firstname.lastname@example.org.
I don't have audio. I can't hear the instructor.
Make sure you are using a compatible headset for your laptop or computer. If you don’t have a headset, you can use the built-in speaker of your laptop. Otherwise, you can use the dial in option by calling the dial in number provided in the class joining email. You may also contact support team for the dial in numbers associated for your training at 1-855-800-8240 or contact them via email at email@example.com.
How can I reach student support?
Support can be reach via phone at 1855-800-8240; via email at firstname.lastname@example.org or via chat support through the chat button on our website. Please note that support office hours will be from 8am-5pm CST Monday to Friday. Any concerns after office hours will be attended the following business day.
Get A Team Quote or Got Questions?
- Personalize learning based on competencies, goals & tools
- Expert Mentoring
- Hands on Labs & Assignments
- AI Curated Digital Book Content
- Adaptive Learning Paths
- Analytics & Benchmarking
- High certification Pass Rates – Over 200,000 people certified and more than 95% of our learners pass their certification on the first attempt