You work for a company as an administrator for an Active Directory Domain Services (AD DS) domain. There are three Hyper-V host servers in the network. All servers are running Microsoft Windows Server 2012 R2. There are virtual web servers deployed across all the host-servers and you plan to support them by configuring a Network Load Balancing cluster. The configuration must be done in a way that cluster servers can be added to or removed from the cluster depending on traffic requirements. Identify what must be there before this configuration is deployed. (opt any TWO)
You work for a company where you decommission Active Directory Rights Management Services (AD RMS) on a server. The server is running Microsoft Windows Server 2012 R2. You want the same server to have a new instance of AD RMS configured. What would be your step of action?
You work for a company that has many virtual managers (VMs). You configure those VMs as Web servers. The VMs are on a highly-available host. The host is running Microsoft Windows Server 2012 R2. Virtual Machine Manager is used to manage the VMs. You are required to configure load balancing between the Web servers. You should also keep in mind that management effort and cost must be minimum. What should be your step of action? (There could be more than one correct solution. Opt the BEST answer(s))
You work for a company currently using Service Center Service Manager 2010. Your network configuration includes a perimeter network that has a self-service portal deployed in it. The network is configured as an Active Directory Domain Services (AD DS) domain with domain controllers running Windows Server 2012 R2. You were using Service Center Service Manager 2010 and now you want to switch to Service Center Service Manager 2012. You install and configure Service Center 2012. There are remote users using the service portal who have complained not being able to access Service Center management functions any longer. What would be your step of action?
You have an existing virtual machine, from which you decide to create a virtual machine template. After the template is created, you must be able to use the existing virtual machine. The effort required to make the template must be minimum. What would be your first step of action?
You are required by your company to migrate a virtual machine from one failover cluster to another. You must endure that during migration, the end users do not experience any down time. Windows Server 2012 R2 or Microsoft Windows Server 2012 is run by host servers in each cluster. Identify the migration method you should use. (There could be more than one correct solution. Opt the BEST answer.)
You work for a company as an IT administrator looking after its Active Directory Domain Services (AD DS) domain. Your company asks you to deploy of Active Directory Federation Services (AD FS) 2.0. There are three locations where the company offices are located. United States, Europe, and Australia. These offices will make use of AD FS. It must be ensured that AD FS is available in each office independently, and resilient to failure. To meet the requirement, you must configure AD FS high availability. You also have to make sure that you have access to the full AD FS feature set. What would be your next action? (There could be more than one correct answer. Opt the BEST answer)
You work for an organization that has tasked you to install a Network Load Balancing (NLB) cluster. There is a computer running Microsoft Windows Server 2012 R2 on which you plan to configure NLB. The server is configured with a single network adapter currently supporting TCP/IP and IPX. You have to inquire what configuration changed must be made prior to installing NLB. A unicast IP address is leased by the adapter through DHCP. What action would you take?
You work for an organization that has an Active Directory Domain Services (AD DS) domain. You are an administrator for the AD DS domain. A user is designated by you to work with you in installing and configuring Active Directory Certificate Services (AD CS). The user will be first instructed to set up a stand-alone root Certificate Authority (CA) on a domain member server that is running Microsoft Windows Server 2012 R2. Multiple issuing Cas will be deployed by you. It is to be ensured that the user has all the rights needed to complete the operation while avoiding to provide excessive rights or permissions. What action would you take?
You have select servers running Microsoft Windows Server 2012 R2. You want to reapply baseline configuration settings on those select servers using PowerShell Desired State Configuration (DSC). You have never used PowerShell DSC on your network before. What actions would you take first?
You are planning a virtual machine (VM) network that will be managed through Virtual Machine Manager (VMM). You want to know how best you can handle IP address assignment for virtual machines. Can you identify the situations where an IP address pool through VMM must be provided by you? (Opt ALL that apply)
Your company’s network is configured as an Active Directory Domain Services (AD DS) domain. The domain is called bcdtrain.com. Windows Server 2012 R2 is running on all domain controllers. You deploy System Center 2012 Service Pack 1(SP1), Operations Manager, Audit Collection Services (ACS) on your network. One ACS Collector is created, and a new SQL Server 2012 server is chosen and deployed as the ACS database. You must make sure that the ACS Collector and ACS Database can communicate without getting intercepted. What would be your first step of action?
There is a System Center 2012 - Configuration Manager environment included in your company’s Active Directory Domain Services (AD DS) domain. In order to report compliance, you use Configuration Manager. You are performing automatic remediation for most member computers. You have two member servers providing specialty services to the network. You want to enquire if problems in the computers are detected by Configuration Manager, while also not wanting it to perform automatic remediation. What action would you take? (opt any TWO)
You are an administrator for an Active Directory Domain Services (AD DS) domain. You are deploying a multi-site failover cluster to support a network application. Cluster nodes will be deployed in different physical subnets in one geographic location. You need to configure support for the cluster to minimize the time needed for clients to locate the new active node when a cluster node goes offline. What should you do? (Each correct answer presents part of the solution. Choose two.)
You are deploying a two-node failover cluster to support a critical application. The cluster servers run Microsoft Windows Server 2012 R2. You plan to use multipath I/O (MPIO) to connect to a storage array. You want the storage management application to specify the paths to use for storage access. The solution should include load balancing. You need to configure MPIO with the appropriate policy. What should you use?
You work for a company as an IT administrator. The company has an Active Directory Domain Services (AD DS) domain which you are managing. You are responsible to deploy a new Certificate that will be used for code signing. You only want the Development team to utilize the certificate to sign code. For that reason, a global group is created and named Development. All developers are added to the group. You need to assign appropriate Discretionary Access Control List (DACL) permissions to the Development and Authenticated Users groups. What action would you take? (Opt any TWO)
To support multiple subnets, you configure a highly-available Dynamic Host Configuration Protocol (DHCP) solution. Following are the requirements that must be met by the solution: -All IP addresses not already leased are available -Avoid duplicate IP address leases -No single point of failure -Multiple DHCP servers can lease addresses to any subnet. While trying to minimize the requirements to deploy the solution, you decide to deploy two servers running Microsoft Windows Server 2012 R2. What action would you take? (opt ALL that apply)
You work for a company as an IT administrator looking after its Active Directory Domain Services (AD DS) domain. You are tasked to deploy Active Directory Rights Management Services (AD RMS) on your network. You install the AD RMS after building a test environment. Upon testing, users identify configuration errors. You decide to remove and reinstall AD RMS. When you uninstall AD RMS you realize that you are not able to remove the Service Connection Point (SCP). You need to remove the SCP manually. What action would you take? (opt any TWO.)
Your company has an Active Directory Domain Services (AD DS) domain on which you use System Center 2012 - Service Manager for service management. You want to provide web-based access to System Center 2012 features. You also have a perimeter network in which you are going to deploy the necessary service components in your perimeter network. A computer is deployed in your perimeter network, having Microsoft Windows Server 2012 R2. You plan to install all required components on this computer. Can you identify the appropriate component you need to deploy in the perimeter network (opt ALL that apply).
You work for an organization as an IT administrator. There are some users on the network who you are advising about monitoring the systems that are running on the network. There is a mix of physical and virtual systems on your network. Microsoft Windows Server 2012 R2 is run on all Hyper-V hosts. If you want to monitor the processor usage about a particular virtual machine, what will you do?
There are objects contained in a sealed management pack and you are required to modify those objects. There is no access to the original management pack which helped create the the sealed pack. You cannot take much time to accomplish this. You have already imported the management pack in System Center 2012. You export the management pack as an unsealed management pack. You want to modify the management pack using the Authoring Tool. What would acrion you do take first?
The company you work for has two computers with each running Microsoft Windows Server 2012 R2. Each computer is configured with a single network adapter. You want to get fault-tolerant continuous file shares for which you configure the computers. Clustered Shared Volumes (CSV) must be supported by the configuration. What would you do? (Opt ALL that apply)
You are tasked to deploy a private cloud environment. You want a Web interface to help you manage the cloud from anywhere. You install System Center 2012 R2. Identify the System Center components you need to install
Bcdtrain.com has Active Directory Rights Management Services (AD RMS) installed and configured in it. There is no AD RMS is installed in fi-print.com. The users in fi-print.com need access the rights-protected content from bcdtrain.com. however, the users in bcdtrain.com do not need access to content in fi-print.com What would you do keeping in mind there must be minimal changes to forest security with minimum administrative overheads?
|Buy Individually Timezone|
About Individual Course:
Our experts featured on QuickStart are driven by our ExpertConnect platform, a community of professionals focused on IT topics and discussions. Interact with these experts, create project opportunities, gain help and insights on questions you may have, and more.