Certification Exam Prep Questions for Designing Cisco Wireless Enterprise Networks (WIDESIGN) (300-360)


QuickStart is now offering you assessment questions Designing Cisco Wireless Enterprise Networks (WIDESIGN) (300-360). Whether you are deciding which exam to sign up for, or simply want to practice the materials necessary to complete certification for this course, we have provided a practice assessment to better aid in certification. 100% of the questions are real questions from a recent version of the test you will take for Designing Cisco Wireless Enterprise Networks (WIDESIGN) (300-360).


Arrow
 

1

In the installation inventory portion of the post- installation report, which two type of information must be included? (Choose two.)

2

In a historic location a customer wants to implement a wireless network but is concerned about the structural and aesthetic impact to the facility. Using wireless mesh which benefits addresses these concerns?

3

An engineer is provisioning a survey kit and preparing for an indoor wireless LAN survey. Which three pieces of equipment should be included? (Choose three.)

4

Which three options are benefits of U-APSD? (Choose three.)

5

The AP and antenna combinations is restricted by a customer for a design to be limited to one model integrated antenna AP for carpeted spaces and with high gain antennas for industrial, maintenance, or storage areas, one model antenna external AP. The engineer forget to change the survey devices and survey several Aps, when moving between a carpeted area to an industrial area. Which is the best option in order to reduce the negative impact of the design?

6

For a carpeted space an engineer is performing a predictive Wireless design, which requires voice capability and location services. For the design which two requirements are inputs? (Choose two.)

7

For a VoWLAN survey the AP has configured property. There is a noise of -87 to -90 dBm contain by the RF environment. What should be the target value for the cell edge reading?

A. -62 dBm
Incorrect.
B. -67 dBm
Correct!
C. -60 dBm
Incorrect.
D. -70 dBm
Incorrect.
8

There is a customer that have dual-band devices that they want to use 40 MHz channels. With a 5508 controller if the customer is using Cisco 3600 Series access points. Which setting assists with this change?

9

To improve client connectivity an engineer is turning RRM parameter. Choose the channel band that results in the best 802.11n client compatibility?

A. UNll-2
Incorrect.
B. UNll-2e
Incorrect.
C. UNll-3
Incorrect.
D. UNll
Incorrect.
E. UNll-1
Correct!
10

An engineer is assigned to assist a customer in a carpeted office space by estimating a number of access point needed to provide voice-grade wireless coverage. To cover this apace of roughly 38,000 square feet how many access points should be estimated?

A. 17
Incorrect.
B. 10
Incorrect.
C. 6
Incorrect.
D. 13
Correct!
11

There is an engineer who plugs in a Cisco Aironet 2700 Series Access Point and it is running in low power. Which three power requirements should be verified? (Choose three.)

12

There is an 802.11n implementation that is being discussed. With the potential 300-450 throughput of new 802.11n Aps. Through an 802.11n AP network to calculate per client bandwidth which three bandwidth requirements are used? (Choose three.)

13

An engineer needs to identify potential Layer 1 interferers as part of a wireless site survey in a hospital. In which three areas is the engineer most likely expect to find sources of 2.4 GHz and 5 GHz RF noise? (Choose three.)

A. emergency room
Correct!
B. magnetic resonance imaging
Incorrect.
C. laboratory
Correct!
D. X-ray radiography
Incorrect.
E. Gamma Knife radiation treatment
Incorrect.
F. kitchen
Correct!
14

At the edge of the cells In an 802.11g network what is the recommended minimum speed for a good Cisco VoWLAN deployment.

A. 11 Mb/s
Incorrect.
B. 36 Mb/s
Incorrect.
C. 12 Mb/s
Correct!
D. 18 Mb/s
Incorrect.
15

At the edge of the cells In an 802.11g network what is the recommended minimum speed for a good Cisco VoWLAN deployment.

A. ACU
Incorrect.
B. ADU
Incorrect.
C. NEMA
Correct!
D. WLSE
Incorrect.
PDP Url

Practice Exams - Designing Cisco Wireless Enterprise Networks


Self-Paced

Learning Style

Beginner

Difficulty

1 Hour

Course Duration

Certificate

See Sample

Buy Individually
About Individual Course:
  • Individual course plan gives you access to this course
$109.00
$109.00
/ Each

Outline

More Information

More Information
Lab Access No
Learning Style Self-Paced Learning
Difficulty Beginner
Course Duration 1 Hour
Language English

Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Contact A Learning Consultant


click here